WELDER with Security Clearance
Dutieso You will perform metal welding work related to the manufacture, repair, modification, and assembly of various equipment, systems, and structures.
o You will use torch to heat metals and bend into specified shapes.
o You will perform trade procedures such as brazing, soldering, flame, and arc cutting, surface hardening, annealing, and metal spraying.
o You will prepare welds for final inspection by removing slag, splatter, and irregularities from welds.
o You will follow instructions from higher level employee or supervisor to plan, lay out work, and complete welding jobsRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o This is a bargaining unit position.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to successfully complete a pre-appointment physical examination.
o You will be required to obtain and maintain a current valid United States drivers license.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shiftQualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on quality of experience, not necessarily the length of timeYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed belowThis job has a screen-out element which will be used to determine minimum eligibility for this jobApplicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligibleThe Screen-out Element for this position is:
1) Performing standard welding operations on a variety of parts, equipment, and machinery; 2) Preparing weld for final inspection by removing slag, splatter, and irregularities from welds; 3) Following oral instructions and written work orders to perform assigned welds; and 4) Heating metals with a torch to bend into specified shapesApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor OccupationsAdditional qualification information can be found at:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation This job does not have an education qualification requirementAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsIf you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information CenterFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPLA BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific positionThis position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirementsOvertime or night differential pay and/or unusual duty hours may be requiredPHYSICAL EFFORT Employee frequently works from stands and other hard-to-reach placesMust stand, stoop, bend kneel, climb, stretch, and work in awkward and cramped positions when welding in hard-to-reach or confined spacesFrequently handles objects weighing up to 45 pounds and over 45 pounds with assistanceWORK CONDITIONS Employee works both inside and outside, sometimes in bad weather and in areas that are noisy, dirty, greasy, and smokyThe incumbent may be exposed to fumes, heat, flying sparks, the glare of torches, and heated materials; possibility of eye injury, electric shock, broken bones, and the chance of cuts when working with sharp objectsThere may be discomfort when wearing protective clothing, safety shoes, gloves, and flash shield or eye goggles, and other equipment as required.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offeredHow You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications aboveIn order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being consideredYour resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this positionTherefore, we encourage you to be clear and specific when describing your experienceAs vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyerYou will be rated based on the information provided in your resume, along with your supporting documentationIf selected, you may be required to provide additional supporting documentationIf after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualifiedPlease follow all instructions carefullyErrors or omissions may affect your rating or consideration for employmentAll qualification requirements must be met before being considered for any vacancies.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offered.
o Required Documents As a new or existing federal employee, you and your family may have access to a range of benefitsYour benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employeeYou may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policiesA complete resume is requiredYour resume must show relevant experience, job title, duties and accomplishmentsYour resume must show complete information for each job entry to support minimum qualificationsThe following information should be provided in your resume, but it is acceptable to provide elsewhere in your application package:
employer's name, starting an Recommended Skills Use Welding Equipment Gas Tungsten Arc Welding Use Welding Technique Metal Inert Gas (Mig) Welding Welding Symbols Welding Procedures Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
o You will use torch to heat metals and bend into specified shapes.
o You will perform trade procedures such as brazing, soldering, flame, and arc cutting, surface hardening, annealing, and metal spraying.
o You will prepare welds for final inspection by removing slag, splatter, and irregularities from welds.
o You will follow instructions from higher level employee or supervisor to plan, lay out work, and complete welding jobsRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o This is a bargaining unit position.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to successfully complete a pre-appointment physical examination.
o You will be required to obtain and maintain a current valid United States drivers license.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shiftQualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on quality of experience, not necessarily the length of timeYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed belowThis job has a screen-out element which will be used to determine minimum eligibility for this jobApplicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligibleThe Screen-out Element for this position is:
1) Performing standard welding operations on a variety of parts, equipment, and machinery; 2) Preparing weld for final inspection by removing slag, splatter, and irregularities from welds; 3) Following oral instructions and written work orders to perform assigned welds; and 4) Heating metals with a torch to bend into specified shapesApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor OccupationsAdditional qualification information can be found at:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation This job does not have an education qualification requirementAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsIf you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information CenterFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPLA BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific positionThis position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirementsOvertime or night differential pay and/or unusual duty hours may be requiredPHYSICAL EFFORT Employee frequently works from stands and other hard-to-reach placesMust stand, stoop, bend kneel, climb, stretch, and work in awkward and cramped positions when welding in hard-to-reach or confined spacesFrequently handles objects weighing up to 45 pounds and over 45 pounds with assistanceWORK CONDITIONS Employee works both inside and outside, sometimes in bad weather and in areas that are noisy, dirty, greasy, and smokyThe incumbent may be exposed to fumes, heat, flying sparks, the glare of torches, and heated materials; possibility of eye injury, electric shock, broken bones, and the chance of cuts when working with sharp objectsThere may be discomfort when wearing protective clothing, safety shoes, gloves, and flash shield or eye goggles, and other equipment as required.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offeredHow You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications aboveIn order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being consideredYour resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this positionTherefore, we encourage you to be clear and specific when describing your experienceAs vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyerYou will be rated based on the information provided in your resume, along with your supporting documentationIf selected, you may be required to provide additional supporting documentationIf after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualifiedPlease follow all instructions carefullyErrors or omissions may affect your rating or consideration for employmentAll qualification requirements must be met before being considered for any vacancies.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offered.
o Required Documents As a new or existing federal employee, you and your family may have access to a range of benefitsYour benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employeeYou may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policiesA complete resume is requiredYour resume must show relevant experience, job title, duties and accomplishmentsYour resume must show complete information for each job entry to support minimum qualificationsThe following information should be provided in your resume, but it is acceptable to provide elsewhere in your application package:
employer's name, starting an Recommended Skills Use Welding Equipment Gas Tungsten Arc Welding Use Welding Technique Metal Inert Gas (Mig) Welding Welding Symbols Welding Procedures Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
